Lead Validation International: Best Practices

DOTS Lead Validation – International has been available for almost a year, and we have received great feedback from our customers on how they are using it. Using this feedback, we have compiled some general best practices to help you get the most from the service and learn how it helps your business.
There are two main uses for this service, prioritizing leads and regulatory compliance.

Lead Prioritization

When your business generates hundreds to thousands of leads daily, it is best to prioritize them based on their quality. One of the simplest ways to determine a lead’s value is using the two outputs from Lead Validation – International; OverallCertainty and OverallQuality. OverallCertianty is a value that comes back in the range of 0-100 and represents how likely the prospect could be contacted with the information they provided. The OverallQuality output shows whether a lead should be rejected, reviewed or accepted.

Each main component of a lead (name, address, email, phone, IP address, and business) is also scored this way. For example, the address component also has certainty and quality scores directly associated with it, AddressCertainty and AddressQuality. The purpose of these individual component values is to allow you to see how the components’ scores break down and make even more informed business decisions.

GDPR Compliance

The second major use we have seen for the Lead Validation – International service is determining if any component of your lead is from a country that falls under the General Data Protection Regulation (GDPR). We have made this simple to identify by providing an output, IsInGDPR, which simply identifies that your lead is covered by the GDPR. Our customers are using this to ensure they stay in compliance with the regulation and avoid its hefty fines.

Now that we’ve outlined its main uses, let’s focus on the three most important parts of the service: Inputs, Test Types, and Outputs and how they can be used.

Inputs

The more inputs you have, the better the returns will be. The service heavily cross-references the individual inputs for each component, which means the more data points you share with the service, the better we can analyze the data.

Some organizations simply do not collect all the data points, or the data they buy doesn’t include them. For these reasons, it is very common to have an abbreviated number of inputs for the service. But Lead Validation – International goes a step further and makes adjustments along the way to help maximize results when not all data points are available. If you are missing an IP address, company name, or another data point, Test Types have you covered.

Test Types

To avoid penalizing lead scores because of lack of data, TestType is a required field that works like a directive to the service, adjusting the algorithm itself to work with the data available. Using a test type is not only required, it is also just as important a consideration as the other input data. For example, attempting to validate business leads without using TestType=business will skew the results, leaving you scratching your head at the end of the day. Best practice is to match the following test type to your available inputs:

Standard Test Types

  • normal1p/normal2p – Incorporates all the main components except the business component. The only difference between the two types is that normal2p allows for a second input phone number, where normal1p is limited to one.
  • noip – Same as normal1p, but does not incorporate IP address input in the processing.
  • nap – Simple but common test type that looks at name, address and phone components, a second phone number is optional.

Business Test Types

Designed for business-to-business leads, not having a business name in a business test type is allowed, but providing a business name returns better scores.

  • business – Like normal2p, but adds the business component.
  • business-noip – Like the business test type except it does not utilize the IP address component. While designed for data with a missing IP address input, this is NOT one of the more recommended operations. Having the IP address as an input for business to business leads provides strong links to connect to other data points and provides some useful flags for fraud.
  • business-n-e-p – Checks name, email, and phone components.

Custom Test Types
Custom test types can be created for specific needs. In some instances, you may have a component that you don’t have much confidence in and want the system to be less strict in analyzing. Conversely, some organizations may have fields that are so critical that they want to scrutinize specific components over others. Most organizations fit into one of our predefined test types, but customizations are available to ensure unique business needs are met to maximize the results from our service.

Multiple test types
Some companies use multiple test types. It is less common to see multiple test types in the same process, because if a field is missing you likely want that lead to be penalized in OverallCertainty. However, you may have multiple processes fed by leads from several departments and various sources, so ideally you will match the test type to the process and available inputs.

Outputs

Lastly, you will want to pay attention to the OverallCertainty and OverallQuality fields when prioritizing your results. It all comes down to the higher the certainty, the better the lead. There are several factors to consider when thinking about prioritization. For instance, cost of leads, sales team bandwidth, or automated CRM lead scoring could all affect priority outside of validation. Your organization will make these considerations before making any final decisions.

The Notes field is helpful for tying everything together, and will help you understand how the return was generated. The service will output general notes about the validation such as IsNamePhoneMatch or IsPhoneAddressMatch, but also creates Notes about each individual component like IsBadStreet for address or IsPublicProxy for IP Address. Each component that can associate itself to a country can impact the output, IsInGDPR, indicating if the lead or a component of the lead falls under GDPR.

In closing, it is worth reiterating that the quality of the results from Lead Validation – International are predicated on the number of inputs and using the correct test types. This service helps you prioritize your leads, identify the weak and the strong points in your data, and stay in compliance when it comes to GDPR. If you’re working with international leads, reach out to our team to learn more about how our validation service can help your business.

Subscribe to our blog

Email *